KEYENCE CV-5701

MODER

CV-5701

TYPE
The controller
sizes
Connects the CV - H500C/H500M, 5 million pixel patterns: 2432 (H) x 2050 (V), about 4.99 million pixels connects the CV - 200 - c/S200C/H200C / 200 m/S200M/H200M, 2 million pixel patterns: 1600 (H) x 1200 (V), approximately 1.92 million pixels, 1 million pixel mode: 1024 (H) x 960 (V), about 980000 like element connecting the CV - H100C/H100M, 1 million pixel patterns: 1000 (H) x 1000 (V), about 1 million pixels to connect the CV - 035 - c/S035C/H035C / 035 m/S035M/H035M, 240000 pixel patterns: 512 (H) x 480 (V), approximately 240000 pixels, 310000 pixel mode: 640 (H) × 480 (V), approximately 310,000 pixels

CCD input

• Color/black and white CCDS (and

CV-H500C/H200C/

200C/S200C/H100C/

035C/S035C/H035C/

H500M/H200M/

200M/S200M/

H100M/035M/

S035M/H035M compatible,

Can be mixed connected)

Image processing main processor

DSP (High speed)

Login Settings

SD card 1 and SD card 2 are set to 1000 respectively

(depending on SD card capacity and setting content), can be switched externally

Number of registered screens

An average setting can achieve 1000 more images (depending on SD card capacity), compression and storage functions

SD card

SD card slot X 2(compatible with SDHC) with OP-87133(512 MB: CV-551/5001

Standard configuration in SD1 slot), CA-SD1g (1 GB: STANDARD configuration in CV-5701 SD1 slot)

Compatible with CA-SD4G (4GB: SDHC)

Set the window

Detection range

128 places /1 Settings

Shielding range

4 places over 1 range

Color extraction function (effective when connecting color CCD)

Color binary, color shade, gray, RGB average gray (color can be indicated by HSV value

), copy the color setting corresponding to 1:n

Detection tools

The regional test

The shape is rectangle, rotation rectangle, circle, ellipse, circle, arc, polygon (up to 12 sides), automatic edge

- Rectangular, automatic edge - round

The position detection

Modeling the search

• Support multiple searches

• Search scope and search objects include rectangle, rotation rectangle, circle, ellipse, circle, arc and polygon (most

Additional 12 edges)

• The search range can be shielded (4 places /1 object)

Multifunction search

• Supports simultaneous categorization based on up to 256 modes

• Search scope and search objects include rectangle, rotation rectangle, circle, ellipse, circle, arc and polygon

(Up to 12 edges)

• The search range can be shielded (4 places /1 object)

ShapeTrax2

• Support multiple searches

• Search scope and search objects include rectangle, rotation rectangle, circle, ellipse, circle, arc and polygon (most

Additional 12 edges)

• The search range can be shielded (4 places /1 object)

The edge position

• Support Angle detection,

• Shapes are rectangles, rotating rectangles, circles, ellipses, circles, arcs, polygons (up to 12 edges), and automatic edges

Edge - rectangle, automatic edge - circle

Trend Edge location

• Support circular and linear detection based on test results

• The shape is rectangle, rotation rectangle, circle and arc

Spot (center of gravity)

The shape is rectangle, rotation rectangle, circle, ellipse, circle, arc, polygon (up to 12 sides), automatic edge

- Rectangular, automatic edge - round

To detect patterns

Edge width

Edge of the pitch

Edge of the counter

The edge Angle

The shape is a rotating rectangle.

Edge matching

The shape is rectangle, rotation rectangle, circle, ellipse, circle, arc, polygon (up to 12 sides), automatic edge

- Rectangular, automatic edge - round

Trend Edge width

The shape is rectangle, rotation rectangle, circle and arc

Spot (characteristic quantity)

• Feret number, center of gravity, spindle Angle, area, Fere diameter, circumference, roundness

• Shapes are rectangles, rotating rectangles, circles, ellipses, circles, arcs, polygons (up to 12 edges), and automatic edges

Edge - rectangle, automatic edge - circle

defects

• Defect detection by subtraction using a differential filter

• Support multiple detection and detection location detection through flaw Gr. Function

• Shapes are rectangles, rotating rectangles, circles, ellipses, circles, arcs, polygons (up to 12 edges), and automatic edges

Edge - rectangle, automatic edge - circle

• Support the use of Fine Color to detect Color images

Trend Edge defects

• The shape is rectangle, circle and arc.

• Supports line, circle, ellipse and free line as reference templates for defect detection.

Bright detection

The shape is rectangle, rotation rectangle, circle, ellipse, circle, arc, polygon (up to 12 sides), automatic edge

- Rectangular, automatic edge - round

Color detection (only when color CCD is connected)

• Support RGB and HSV detection

• Shapes are rectangles, rotating rectangles, circles, ellipses, circles, arcs, polygons (up to 12 sides)

The geometric

• References that support calculated results

• Shapes are points, lines and circles

OCR

• Can support up to 2 lines, 20 characters/line character recognition

• Rectangular in shape

• OCR time and date password function

interface

Control input

External trigger input

At 2 o 'clock

EV compatible input ratings:

26.4 V or lower, 3 mA or lower

You can choose 4 CCDS for higher

Capture simultaneously/individually (not connected)

Cv-e500, at most

To simultaneously capture from 2 sets

The image of the CCD.

You can select an individual trigger delay for each trigger input (0 to 999 ms)

Control input

18 points

Input rated less than 26.4V and more than 2mA

Control the output

General output

27 points (including 2 points of FLASH output triggered by external linkage)

NPN open collector

Aggregate output

1 point, NPN open collector Max 50mA (below 30V)

Support integrated decision holding control and click output (0 to 9999 ms)

Display output

SVGA 800×600 (24bit color 60Hz)

Operation indicator

Power supply, ERROR LED display

RS-232C

Numerical output, image data (compressible output) and controllable input and output, can communicate with other in no protocol

Can support up to 115200bps baud rate

PLC Link, CC-Link, or EtherNet/IP™ cannot be used together

Ethernet

Numerical output, image data (compressible output) and controllable I/O can be the same as other communication ports

The use of

100BASE-T/100BASE-TX/10BASE-T

USB

Numerical output, image data (compressible output) and controllable I/O can be the same as other communication ports

The use of

Support usb the HI - SPEED

The PLC connection

The Ethernet port or RS-232C port can be used for numeric output and controllable I/O

Its communication port is also used

The following PLC*1 is supported through each link unit

• KEYKENCE KV-700 Series, KV-1000 series, KV-3000 Series, KV-5000 Series,

KV - 5500 series

• Mitsubishi Electric CorporationA series (RS-232C only), Q Series, L Series

• OMRON Corporation SYSMACC series (RS-232C only), CJ/Cj1RS1 series

• Yaskawa Electric: MP900 series (RS-232C only)/MP2000 series

Cc-link, RS-232C, or EtherNet/IPTM cannot be used simultaneously

CC-Link

By connecting ca-NCL10E, an optional CC-Link unit, numerical input/output and control can be supported

Make input/output.

• Support version 2.00/1.10 of the protocol

• PLC links, RS-232C, or EtherNet/IP™ cannot be used simultaneously

EtherNet/IP ™

Numerical Input/output and control Input/output enabled when using an Ethernet port

• Supports periodic communication (maximum 1436 bytes), supports message communication

• Up to 128 devices can be connected

• Meet the requirements for conformance test version A5

• Do not use to connect to PLC links, RS-232C and CC-links

Lighting control

LED lighting (12 V, 24 V) and brightness control can be enabled by connecting optional lighting extension units

System.

• Each cell has 2 channels and can connect up to 4 cells

• Support multi-function luminescence mode

Continuous shooting function

• 1 ~ 32 consecutive reads (Max., min., mean)

• Detect error values can be excluded from detection results

Perform the conditional setting function

In each detection window can be set and other arbitrary window detection results (OK/NG) linkage operation /

Don't run

Image shooting setting function

Handle range setting function

• 980,000 pixels can be specified anywhere within 1.98 million pixels

(1024 (H) x 960 (V)) is the processing range (1 million pixel module

Type).

• 240,000 pixels can be specified anywhere within 320,000 pixels

(512 (H) x 480 (V)) is the processing range (standard mode)

However, when cV-H035C /H035M is connected, only 240,000 pixels of the 310,000 pixels are supported

Range.

Scanning mode (effective when connecting black and white CCD)

Line by line/interlaced scan

Shooting start/end line setting function

Any start/end line can be set within the image processing scope

Cv-h200c /H200M cannot handle ranges below 100 lines.

Correction function

Position adjustment

Batch, individual (up to 128), X, Y, ± 180° rotation.

CCD gain adjustment

CCD sensitivity adjustment, offset adjustment, span adjustment

(RGB single/uniform, span support 16 - step modulation Settings, connected to the color CCD also support RGB

Set separately)

White balance adjustment (effective when connected to color CCD)

Manual setting through white paper

Image reflection processing function

Support left-right reversal

Correction function

Supports conversion of each CCD from X, Y multiplier setting, detection value and calculation value

Filter function

The total number of

The same type is repeated 9 times, number of Seg. 13 Seg. (binarization, subtraction only 1Seg./ window)

type

Expansion, contraction, averaging, median, edge emphasis, edge X extraction, edge Y extraction, Sobel,

Prewitt, Robert, Laplacian, Binarization, Difference, bright complement, contrast transformation, real-time difference,

Real - time concentration correction, fuzzy processing

Display language

Switch between Japanese/English/German/Italian/French/Traditional Chinese/Simplified Chinese characters

Computing functions

Numerical calculation

Set the number of

128 /1 Settings

arithmetic

The +, -, x, the members present

The arithmetic function

Self multiplication, power, decimal rounding, maximum, minimum, average, range average,

Square root, absolute value, residual, distance, Angle, sin, cos, tan, ASin, ACOS, ATan, PI

Comparison operator

<, ==, Not

Geometric calculation function

The distance between two points, the Angle of the line between two points, the radius of the circle, the center of the circle, the average Angle, the line, the intersection, the distance between the points and the line

Departure, Angle of line, Angle of intersection of two lines, vertical line between point lines, vertical bisector, midpoint

Coordinate transformation function

Coordinate transformation, rotation of columns and columns

Type transformation function

Coordinate constant conversion, constant coordinate conversion, Angle unit conversion

Logical operator

AND, OR, NOT, XOR

Classification function

Max index output, min index output

The system function

Test times, test time, year, month, day, hour, minute and second

Time axis calculation function

The previous detection result fetch operator

Command memory

It has 1000 command memory that can be changed by external and remote control during operation

Support functions

Statistical analysis

Number of data

Up to 20,000 data (unified storage of SD card is supported)

Statistics project

Maximum, minimum, mean, deviation (3), and the number of OK/NG times

Picture saving (effective when connecting black and white AND color CCD)

The following number of images can be saved

In system memory:

• Up to 1023 images

(Black and white CCD, 240,000 images

Element model)

• Up to 511 images

(Black and white CCD, 310,000 images

Element model)

• Up to 255 images

(Black and white CCD, 1 million image

Element model)

• Up to 127 images

(Black and white CCD, 2 million image

Element model)

• Up to 50 images

(Black and white CCD, 5 million image

Element model)

• Up to 1020 images

(Color CCD, 240,000 images

Element model)

• Up to 509 images

(Color CCD, 310,000 images

Element model)

• Up to 252 images

(Color CCD, 1 million images

Element model)

• Up to 124 images

(Color CCD, 2 million images

Element model)

• Up to 47 images

(Color CCD, 5 million images

Element model)

These are connected to only one

CCD and store the condition

Set to the maximum at [all]

Value).


Set subsidy function

Enlarge/shrink the screen display

Setting time and running time can be between 4% and 1600% (full-screen display is between 6% and 2500%)

(Single multiplier can be set for multi-screen display)

Edge differential waveform display

Display edge waveform image at setting and running time, edge strength and detection value at setting time (supporting part)

According to outline

It can display the full-range detection position image of set, running Trend Edge position and width

Stability display

The image of flaw detection (flaw level) in setup and operation can be displayed

Cut projection waveform display

OCR projection waveform can be displayed directly and automatically during setting and operation

The detection range includes movement

You can move Windows that select the same CCD and the same registered image in any XY direction synchronously

Defect levels

The Trend Edge tool's defect level waveform can be displayed as a waveform in set mode or run mode.

Display template Settings

Number of display templates

10 Mode /1 Settings (four of which are rated) allow external switching

The number of images that can be displayed simultaneously

Up to 5 images can be displayed simultaneously (select 5 images (horizontal)/5 images (vertical))

The current image

The current image (NG image) up to 3 times before can be used as the holding image for screen display, and the detection node can be referred to

Results and testing time

(The display times can vary from 0 to 3 times according to the CCD connection)

Displays custom functionality

Customize the display mode

10 Screen /1 setting

Custom display items

String (can use Chinese characters) : test value (can specify decimal number), judgment result, arbitrary text, model, live

Moving words

Test results are linked

• The linkage display color can be switched in the judgment result of the model and any text

• Can display arbitrary data (active text) according to the scale table linked in the detected value

Tolerance changes during operation

• Changes can be made to window upper and lower limits and command memory

• Supports lighting adjustments during work (when CA-DC20E is connected)

Simulation function

Built-in analog features that can be created for cV-3001 SE, SEII, SEIII and CV-5001 series

New configuration data and save data in FE format on CV-5001SE.

Set up file update function

Settings used on cV-3001 series or CV-5001FE series can be converted to apply to

Configuration data format for cV-5001 series 2.

Custom menu function

Shortcut menu can be made for any set screen (20 mode/setting)

CF card saving function

• Detection value, judgment result, NG times, detection image (compressible storage), image storage (compressible storage),

Images taken, statistics, RS-232C communication records, set content (only set content can be saved to

SD1/SD2 slot)

• Supports direct saving in test run (except Settings)

other

Image capture function, password function, retest function, file management function,

I/O monitor, RS-232C monitor (with record saving function)

The rated

The power supply voltage

24 VDC plus or minus 10%

Current consumption

2.4a (maximum load of 2 CCDS)/ 3.2A (maximum load of 4 CCDS)

Environmental resistance

The environment temperature

Connecting 2 CCDS: 0 ~ +50 °C (connecting more than 1 million pixels OF CCDS: 0 ~ +45 °C)

4 CCDS connected: 0 ~ +45 °C

Relative humidity

35 to 85% RH (non-condensation)

The weight of the

About 1250 g